■Notice (2025/06/10)
We found some FDE stock, this will be the last time.
There are no plans for the next restock for the time being. Don't miss this opportunity!
*The screw pitch of the included mounting ring nuts (labeled VFC and MWS respectively) is reversed due to a manufacturer error. If the nut does not fully screw in when assembling into the receiver, please try the other nut.
*As this is an overseas replica, there may be slight tool marks or minor scratches. Please be aware of this.
*There may be operational marks from function checks. These are unavoidable during inspection, so please understand.
*Initially, the opening/closing of the main unit and the button movement of the lock part may be quite stiff.
It will become smoother with fitting during assembly and future use, please understand.
※Loosening the hex screws on the hinge part can slightly relieve the stiffness of opening and closing.
Loosening too much may cause wobbling.
■Product Introduction Video (Produced by Filip Airsoft)
■Product Reviews
・Evolutor Blog
・FilipAirsoft
・Milspec_Mojyo
【Product Description】
This is a LAW TACTICAL type replica compatible with Tokyo Marui MWS/VFC M4 HK416.
Color: Black (QPQ treatment), FDE (Magpul Dark Earth)
Material: Stainless steel
Compatible models: Tokyo Marui MWS.
VFC M4, HK416, etc.
・For VFC, two different sized extensions are provided to accommodate the inner diameter of the rear of the bolt of current M4 HK416, HK416A5, forged receivers, etc.
Compatible with approx. 16.7mm and approx. 15.5mm diameters. Please check the inner diameter of the rear of your VFC bolt carrier.
Compatibility with GBB M4 from other manufacturers has not been verified, so it may work if the above extension sizes match...
【Regarding Assembly】
・Please prepare a separate buffer tube with a real-spec screw pitch.
When installing on MWS, a real-spec buffer tube (not genuine) is required separately.
・The manufacturer has confirmed assembly on MWS and VFC out-of-the-box conditions, but adjustments and fitting may be necessary in some cases. Please understand.
Compatibility with third-party bolts or buffers has not been verified, so please assume adjustments are necessary during assembly.
・Although we include various compatible parts to facilitate assembly in a genuine state, adjustments and fitting to the main unit may be necessary for smooth operation.
【Caution】
※This product is a replica part for airsoft.
・Some processing and fitting may be required to ensure smooth operation when assembling the product.
・Although the quality of overseas products has improved, it often still falls short of the quality of domestic products.
Therefore, the packaging may be damaged or dirty, and the product itself may have minor scratches from the factory.
・We provide information based on product information from the manufacturer, but specifications for minor parts may change in future releases.
By placing an order, you acknowledge and agree to the above points.
